'Mission detox' stick mask
Multi-mineral-based formulation
Consumer benefits
Non-drying and detoxifying
Applications
Skin care – face mask
Description
This non-drying, mineral-based face mask ensures a deep detox effect thanks to the ImerCare® 04K and ImerCare® 03D grades it contains.
Its ultra-innovative solid texture is practical, hygienic and incredibly easy-to-use.
Supplier
Imerys
Typical formulation ingredients
Phase | INCI Name | Ingredients | Function | % |
---|---|---|---|---|
A | Glycerin | Humectant | q.s. | |
A | Stearic acid (and) Palmitic Acid | Stearine TP 1200 (Stearinerie Dubois) | Saponification Reagent | 6.0 |
B | Acqua | Solvent | 31.3 | |
B | Sodium Hydroxide | Sodium Hydoxide Pellets Extra Pure (Merck) | Saponification Reagent | 0.98 |
C | Glycerin | Humectant | 5.0 | |
C | Chondrus Crispus (Carrageenan) | Gelcarin PC 812 (Givaudan France) | Thickener | 1.0 |
C | Chondrus Crispus (Carrageenan) | Gelcarin PC 379 (Givaudan France) | Thickener | 0.3 |
D | Acqua | Solvent | 9.6 | |
D | Caprylyl/Capryl Glucoside (and) Aqua | Oramix CG 110 (Seppic) | Wetting agents | 4.0 |
D | Diatomaceous Earth | ImerCare® 03D (Imerys) | Detoxifying agent | 4.0 |
D | Kaolin | ImerCare® 04K (Imerys) | Detoxifying agent | 5.0 |
D | CI 77499 (Iron oxides) (and) Glycerin (and) Aqua (and) Xanthan Gum (and) Sodium Citrate |
Covarine Black WN 9798 (Sensient) | Pigment | 1.0 |
D | Fragrance | Parfum Thé et Concombre JM/L26 (Floressence) | Fragrance | 0.6 |
E | CI 77492 (Iron oxides) CI 77891 (Titanium dioxide) (and) Mannitol (and) Hydrogenated lecithin (and) Polymethyl Methacrylate (and) Aluminium Hydroxide | Sugarcapsule Magic Yellow SP (Daito Kasei) | Pigment | 3.0 |
Developed in cooperation with Sicaf
Procedure
- Combine A ingredients and heat to 80°C whilst stirring.
- Dissolve Sodium Hydroxide in water.
- Add phase B to phase A slowly.
- Heat for 30 minutes at 80°C.
- Pre-mix phase C ingredients and add them to the blend at 80°C.
- Homogenize the mixture for 10 minutes.
- Pre-mix phase D ingredients before adding them to the blend to facilitate dispersion.
- Add phase D to the blend at 80°C and stir until homogenized.
- At the last minute, add the phase E ingredient whilst stirring gently (150 RPM maximum) at 80°C.
- Homogenize the mixture and pour it into the container.